Ashtech Z-FX Wartungshandbuch PDF herunterladen (Seite 64)

52 Z-Surveyor & Z-FX Operation Manual

KINEMATIC

• Epoch Counter (EPOCH COUNTER:***)

Number of epochs to record on each point.

• Minimum SV required (MIN SV:*)

Only affects when the receiver begins to beep indicating there are not

enough satellites to keep a position solution; independent from the minimum

number of SVs required to record any data.

• Recording Interval (REC INT:***.*s)

Refer to Table 4.5 for information on available recording intervals.

• Recording Elevation Mask (ELEV MASK**º)

Data from satellites under the elevation mask will not be recorded to the

PCMCIA card.

• Display Mode (MODE:********

STATIC/KINEMATIC/RTK BASE

)

Receiver displays the parameters relevant to survey mode selected.

RTK BASE

• Base Port and Data Type (PORT/TYPE) submenu

This submenu displays/sets the RTK data type sent by the RTK Base on each

of the four ports available.

Table 4.6 lists the possible data types.

• Recording Interval (REC INT:***.*s)

Refer to Table 4.5 for information on available recording intervals.

• Recording Elevation Mask (ELEV MASK**º)

Data from satellites under the elevation mask will not be recorded to the

PCMCIA card.

• Display Mode (MODE:********

STATIC/KINEMATIC/RTK BASE

)

Receiver displays the parameters relevant to survey mode selected.

Table 4.6: Selectable Data Types

DBEN Ashtech RTK Base compact binary format

RTCM RTCM type 18/19 and 3/22 are enabled

OFF No RTK Base data sent on that port

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 93 94

Keine Kommentare

Ashtech Z-FX Wartungshandbuch Seite 64