Ashtech ProMark 200 Spezifikationen PDF herunterladen (Seite 30)

English

graduation on this device, and then enter the read value

in the Antenna Height field.

• Select the antenna type used.

•On the Recording tab, make sure the Record raw data for

post-processing function is enabled, check that the storage

medium used to store the collected data is the one you

really want to use (it is a good practice to use a Storage

Card) and choose the recording interval (default: 1

second). To change the storage medium, see also

Changing the Storage Medium for Raw Data Collection on

page 39.

•Tap OK to complete the rover configuration step. Raw data

collection is now started. Tap OK again to return to the

map screen.

• Select Menu>Initialize and choose your initialization

method:

– If you select “From Bar”, ProMark Field asks you to

name the initialization point (the point will be saved to

the job) and possibly correct the antenna height on the

bar. Then tap OK. Keep the rover antenna on the bar

until the initialization time is up (60 seconds; see

progress bar on the screen), then carefully move this

antenna to the top of the pole or bipod, taking care not

to mask it.

– If you select “From Known Point” (you are supposed to

stand on that point), choose that point from the list of

points stored in the job and stay there until the

initialization time is up (5 sec; see progress bar on the

screen).

• Taking care to keep the pole upright and the antenna

unmasked, go to the start point of the line.

•Tap Log. In the Site ID field, type the name of the start

point of the line.

If you use a purely numerical value for this field, then

ProMark Field will automatically increment the Site ID

name. Optionally, add a description in the field

underneath. This may be one of the feature codes you

defined earlier.

•On the Antenna tab, you may also check the antenna

height and type entered previously and make last-minute

changes.

•On the Settings tab, you may choose the rate at which the

software will log points (along the line) in the job file.

Points may be logged every x seconds or units of distance.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Ashtech ProMark 200 Spezifikationen Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Ashtech ProMark 200